Loader Backhoe MG1320H


Note:
1. Working cycle time equals the sum of the raising time taken by the swing arm, the descending time of the swing arm, and the rolling time of the bucket.
2. We reserve the right to make changes to the configuration and specification of our products without prior notice due to the continuous technical improvements of CG construction machines.

Our sufficient experience in supplying motor graders allows us to manufacture high quality and low cost wheel loaders, backhoe loaders, motor graders and more heavy equipment machines. These heavy equipment machines are ISO9001: 2000, CE, TIRE III, and GOST certified.

Top Class Motor Grader are generally characterized by the following features.
1. Our Top Classbackhoe loaders meet Euro CE standards.
2. ROPS/FOPS cab
3. The imported engines meet European


MG1320H (CE) Top Classmotor grader has the following features:
1. It has been awarded CE certificate by TUV.
2. This Top Classmotor grader is powered by Cummins QSB6.7 engine, which meets EURO III, EPA Tier III standards.
3. It adopts a German ZF transmission: 6-speed (forwards) and 3-speed (reverse).
4. This heavy equipment machine is equipped with an imported multi-way valve, accumulator and other braking components.
5. Its independent cooling system is driven by a hydraulic motor.
6. This Top Classmotor grader has a spacious ROPS/FOPS cab and a non-freon A/C.

High-performance Engine
Our MG1320H (CE) Top Classmotor grader is powered by an imported U.S. Cummins engine QSB6.7, which is a turbocharged diesel engine that uses a water-cooling system. It is very powerful, highly efficient and reliable. It comes with a large torque backup and is economical in its fuel consumption. It has low noise and emission levels.

Transmission System with Quick Response
- This Top Classmotor grader is equipped with a German 6WG200 ZF electro-hydraulic shift transmission: 6-speed in forward movement and 3-speed reverse.
- It is applicable to different working conditions.
- Its electric shift and neutral start protection device makes the shift easier and smoother.
This greatly increases the machines stability and efficiency while reducing the maintenance cost. Its service life is over 10,000 hours.
- This motor grader is economical and produces low levels of noise.

Balanced Hydraulic System
- The moldboard, front bulldozer and the rear ripper of this Top Classmotor grader is controlled by two groups of multi-way valves.
- Fitted with U.S. HUSCO valves
- The oil pressure is 17.5 Mpa.
- This road grader has high efficiency and is economical during long working periods. It can reduce the friction between the oil and hose, control the oil temperature and lengthen the service life of rubber sealing items.

Side Shifted Working Implement
A side shift working implement is fixed by an electro-hydraulic controlled taper pin. It a wide range of movement and is rigid. The draw bar is of "Y" type with a solid core structure and is able to endure heavy loads.

Durable Draw Bar and moldboard
- Rigid "U" type solid framework.
- The front ripper keeps this Top Classmotor grader away from interferences and facilitates accurate shoveling.
- The turning circle of this grader is fixed on the draw bar by four adjustable metal plates and is driven by a hydraulic motor and turbine reducer.

Comfortable and Safe Driving Conditions
- This Top Classmotor grader has a ROPS/FOPS cab with CFC-free air-conditioning system.
- Its fully adjustable seat offers a comfortable working condition for the driver.
- Its large window provides good visibility.
- The control panel of this Top Classmotor grader adopts a short joystick, which is used for convenient operation of the working implements. The joystick will not block the view of the driver.
- Our patented spring operation device can be rectified or fixed using the footplates, making it convenient.
- The switches and instruments of this maintainer are suitably designed for easy operation and protection of the motor grader driver.
- This motor grader adopts an electronically-controlled engine cover that opens backwards. It allows easy maintenance of engine and radiator systems.

Item Unit Value
Operating Mass kg 17100
Diesel Engine Model QSB6.7
Rated Power kW/hp 164/220
Rated Revolution r/min 2200
Overall Dimensions Standard L × W × H mm 8980x2600x3470
With Optional Devices L × W × H mm 10876x2600x3470
Wheel-base Front Axle to Rear Axle mm 6210
Middle Wheel to Rear Wheel mm 1553
Wheel track mm 2150
Steering System Max. Front Wheel Steering Angle (°) ±45
Max. Articulated Wheel Steering Angle (°) ±20
Min. Turn Radius mm 7700
Moldboard Length mm/ft 3960/13
Height (Arched Length) mm 650
Max. Tilt Angle (°) 90
Rotating Angle (°) 360
Cutting Angle Adjusting Range (°) 42~73
Max. Lift above Ground mm 410
Max. Digging Depth under Ground mm 440
Max. Shoulder Reach (Left/Right) mm 1440/2090
Scarifier (Optional) Scarifying Width mm 1250
Max Dozing Depth mm 280
Number of Teeth Shanks Piece 11
Rear-mounted Ripper (Optional) Max. Digging Width mm 2000
Max. Digging Depth mm 315
Number of Shanks Piece 5
Bulldozer (Optional) Width mm 2740
Height mm 920
Max. Dozing Depth mm 205