Wheel Loader CG948H


Note:
1. Working cycle time equals the sum of the raising time taken by the swing arm, the descending time of the swing arm, and the rolling time of the bucket.
2. We reserve the right to make changes to the configuration and specification of our products without prior notice due to the continuous technical improvements of CG construction machines.
Operating weight 13200kg
Load capacity 4000kg
Rated Capacity 2.3 m3
Breakout Force 133kn
Working cycle time 10.4s
Max. dumping height 2837mm
Max. dumping reach 960mm
Max. gradeability 30°
Min. turning radius 5695mm
Max speed (forwards) 37km/h   23mhp
Length 7400mm
Width 2800mm
Height 3485mm
Engine Cummins QSB6.7 
Rated power of engine 119KW / 159.6HP

1. CG948H (CE) standard wheel loader has obtained the CE certification of TÜV Rheinland Group.
2. The wheel loader uses the imported original Cummins QSB 6.7 engine that can meet the criteria of European Emission Stage III and EPA Tier III standard, and has the advantages of low oil consumption and abundant power supply.
3. Using the load-sensing full hydraulic power steering system, dual-pump-converging hydraulic system and the jib lifting limitation device as well as the bucket auto-leveling equipment, the wheel loader then can operate conveniently and effectively and save energy.
4. Employing the Germany ZF 158 electro-hydraulic transmission with four forward speeds & three backward speeds and the wet drive axle, our machine can work under various operation conditions.
5. The hydraulic-motor driven independent cooling system featured high cooling capacity is also employed. The radiator is easy to clean.
6. Our wheel loader has the spacious ROPS/FOPS cabin, with operation box integrated with the seat. The cabin has attained the national patent.
7. The wheel loader is also equipped with the backward opening engine hood that is lifted by electric motor. Then, both the engine and the cooling system can operate well.

ITEM CG938H CG948H CG958H CG990H
Operating weight 12500kg/ 13200KG / 29101LB 17700kg / 39021lb 31500-32000kg / 69300-70400LB
Bucket Capacity 2.1 m3 2.3m³ / 3yd 3-4.7yd / 2.5-3.6 m3    5.9-8.9yd /4.5-6.8m3
Rated Load capacity 3800kg 4000kg / 8818.5lb 5000kg / 11023.1lb 9000kg / 19800lb
Breakout Force 119KN 133kn / 29.925kip 180kn / 40.5kip 260kn / 58.6KIP
Fuel Tank Capacity   180l / 39.6gal 250L / 55GAL 420L / 110.95GAL
Grade Ability 30° 30° 30° 30°
Max. dumping height 2949±50mm 2837+-50mm / 9'3''+-1.9'' 3196mm+-50mm / 10'5''+-1.9'' 3313mm+-50MM / 10'9''+-1.9''
Dump Clearance @ Max. Lift 923±50mm 960+-50mm / 3'1''+-1.9'' 1039mm+-50MM / 3'4''+-1.9'' 1317mm+-50MM / 4'5''+-1.9''
Max. Forward Speed 34km/h   21mhp 37km/h   23mhp 36KM/H     22.4MPH 32KM/H     19.9MPH
Hydraulic Oil Capacity   100l / 22gal 110L / 24GAL 260L / 68.6GAL
Max. Traction Force 110KN   180kn 260kn
Working cycle time 9.6S 10.4S 11.8s 12s
Wheelbase 2900±30mm   3360mm 3600mm
Wheel track     2745mm 3250mm
Min. turning radius 5200 5695 6400mm 6882mm
Length 7330mm 7400mm 8180mm 9459mm
Width 2470mm 2800mm 3000mm 3579mm
Height 3300mm 3485mm 34540mm 3821mm
         
Engine        
Model Cummins QSB6.7   Cummins QSB6.7  Cummins QSB6.7     Cummins QSM11    
Type Line Engine, Water Cool,Dry Type Cylinder jacket, Direct Injection Line Engine, Water Cool,Dry Type Cylinder jacket, Direct Injection Line Engine, Water Cool,Dry Type Cylinder jacket, Direct Injection Line engine, Turbo-charged, Electri control, Air to air aftercooler
Displacement   6.7L / 408.8IN³ 6.7L / 408.9IN³ 10.8L / 659IN³
Peak Torque   732N.M 949N.M 1674N.M
Rated Power 116KW / 158HP 119KW / 159.6HP 164KW / 219.9HP 250kw / 335.2HP
Rated Revolution 2200R/MIN 2200R/MIN 2200R/MIN 2100R/MIN
         
Steering System        
Type   Full Hydraulic Steering system with pressure load-sensing Full Hydraulic Steering system with pressure load-sensing Full hydraulic amplification hinge joint steering
Turning Angle   35° each Side 35° each Side 38° each Side
Min. Turning Radius 5200MM Bucket outboard 6600mm / 21'6'' Bucket outboard 7350mm / 24'1'' Bucket outboard 7695mm / 25'2''
  Rear Tire outboard 5800mm / 19' Rear Tire outboard 6700mm / 21'10'' Rear Tire outboard 6882mm / 22'6''
         
Transmission        
Torque Converter Type   Three element, Single Turbine Three element, Single Turbine Three element, Single Turbine
Transmission Model ZF 4WG 158, German original ZF Electric-hydrautic control shift gearbox ZF 4WG 200, Electric-hydrautic control shift gearbox ZF 4WG 310, Fixed axis type, Automatic shifting
Gears   Four forward speed and three backword speed Four forward speed and three backword speed Four forward speed and three backword speed
Hydraulic Working System        
Working System Pressure 19MPA 21MPA 17.5MPA 22.5MPA
Lifting Time of Working Device   <=5.5S <=6.5S <=7.1S
Action Time of Implement <=9.6S <=11.6S <=12.5S <=12S
Front and Rear Axle        
Main transmission Type   First level spiral gear deceleration First level spiral gear deceleration Cone-shaped gear
Wheel side Braking Type   Planetary Reducer Planetary Reducer Planetary Reducer
Drive Axle Braking Type Wet type brake Wet type brake Wet type brake Wet disc type brake
Tire        
Specfication 20.5-25-20PR 20.5-25-16PR 23.5-25-16PR 29.5-25-28PR
Front Tire Pressure   0.3MPA 0.3MPA 0.4MPA
Rear Tire Pressure   0.3MPA 0.3MPA 0.38MPA
Braking System        
Braking Full hydraulic Full hydraulic Full hydraulic Wet disc type brake
Parking Brake Spring braking oil release Spring braking oil release Spring braking oil release SAHR Caliper type brake